So I'm sure this has been beat to death and maybe my search juju sucks but I can't seem to find anything related to the exact problem I'm having.
I'm using Marlin 2.1 as I found a users post on github that's having a problem with latest version of Marlin on an 8bit board with bltouch giving skewed numbers on level of his bed. He said it does not happen on 2.1 according to him so I decided to save myself a potential problem and use the same version.
I'm adding an authentic bltouch v3.1 to my Makerfarm printer (ramps/meag2560). I seem to have it wired correctly. When I turn the printer on the probe cycles twice and the red led is on solid when the probe is stored. However if I try to deploy the probe from the lcd it does nothing. Tried storing thinking maybe the signal is flipped and the probe still did nothing. I had the Z 3" off the bed so I tried the home function and the X and Y axis went home then moved to middle of bed (well not really as it was 1-1/2" off in X and Y but that should be easy to solve) and started bringing the Z down w/o deploying the probe so I killed the power. I configured Marlin per Antclabs instructions. Though it was for 2.0 but I would think it should still be the same or similar. I've made changes as discussed per what I've read on multiple websites and nothing seems to make a difference. I am using VS with Marlin autobuild and PlatformIO add-ons. VS doesn't report any errors in the config.h and build and uploads it just fine.
The attached txt file has my probe and bed leveling settings from my config.h. Figured it would be easier then reading it in a post.
Any help would be appreciated.
I'm using Marlin 2.1 as I found a users post on github that's having a problem with latest version of Marlin on an 8bit board with bltouch giving skewed numbers on level of his bed. He said it does not happen on 2.1 according to him so I decided to save myself a potential problem and use the same version.
I'm adding an authentic bltouch v3.1 to my Makerfarm printer (ramps/meag2560). I seem to have it wired correctly. When I turn the printer on the probe cycles twice and the red led is on solid when the probe is stored. However if I try to deploy the probe from the lcd it does nothing. Tried storing thinking maybe the signal is flipped and the probe still did nothing. I had the Z 3" off the bed so I tried the home function and the X and Y axis went home then moved to middle of bed (well not really as it was 1-1/2" off in X and Y but that should be easy to solve) and started bringing the Z down w/o deploying the probe so I killed the power. I configured Marlin per Antclabs instructions. Though it was for 2.0 but I would think it should still be the same or similar. I've made changes as discussed per what I've read on multiple websites and nothing seems to make a difference. I am using VS with Marlin autobuild and PlatformIO add-ons. VS doesn't report any errors in the config.h and build and uploads it just fine.
The attached txt file has my probe and bed leveling settings from my config.h. Figured it would be easier then reading it in a post.
Any help would be appreciated.