This is an upgrade to a recent bugfix 2.0.x and it previously worked.
If I reset, home all and issue a G0 x150 y150 command the drives buzz, the head goes no place, and the position indicators all update to 150 150.
If I issue G0 x150 it goes to X150. I then issue G0 Y150 and it goes to Y150, and the position indicators all update accordingly.
Does the same with scripts
Using Repetier-Host
Other movement seems to work properly.
this is a CoreXY machine and that is set.
It Quick homes OK.
babystep is OK
I believe the config files are all correct, but something obviously is not.
If I reset, home all and issue a G0 x150 y150 command the drives buzz, the head goes no place, and the position indicators all update to 150 150.
If I issue G0 x150 it goes to X150. I then issue G0 Y150 and it goes to Y150, and the position indicators all update accordingly.
Does the same with scripts
Using Repetier-Host
Other movement seems to work properly.
this is a CoreXY machine and that is set.
It Quick homes OK.
babystep is OK
I believe the config files are all correct, but something obviously is not.