Setting up my modified FolgerTec I3 with a SKR v1.3 and Marlin 2.0. Working through everything in steps and learning. Got homing and bed leveling working, but ran into a problem with the extruder fan not working. In the process of trying to reasign the pins for the fan. (also need help with that) Now when I home X the extruder stops at the endstop then when doing the slow touch will runs past the endstop without seeing it. I could start all over like I usually do but I would like to know what I did wrong. Could someone look at my files and correct me? I'm thinking it's an addressing conflict on the probe. Let me know if you need more info. Thx
↧