I am using
1. BTT SKR V1.4 board with all A4988 drivers
2. nema 17 stepper motors
3. Inductive type probe sensor (6V) for Z axis and optical endstops for X and Y axis
4. 12 v SMPS power supply.
I have done all the settings and connections. But Currently I am facing 2 issues with my core XY Hypercube 3d printer:
1) When I connect printer to pronterface, and send M119 command, it shows X and Y endstops as "Open" and z endstops "triggered". My x and y endstops works fine for "Open" and "triggered" but z endstops don't changes the status. It stays as it is. Kindly suggest me way forward to solve this issue.
2) although my x and y endstops are open, still when I try to move x and y axis, they are not moving at all. My X and Y motor are feeling resistance to move. ( Simple words- My x and y motors are feeling that endstops are triggered even if my endstops are open)
Please help me in these two issues
Waiting for your response. Thank you.
1. BTT SKR V1.4 board with all A4988 drivers
2. nema 17 stepper motors
3. Inductive type probe sensor (6V) for Z axis and optical endstops for X and Y axis
4. 12 v SMPS power supply.
I have done all the settings and connections. But Currently I am facing 2 issues with my core XY Hypercube 3d printer:
1) When I connect printer to pronterface, and send M119 command, it shows X and Y endstops as "Open" and z endstops "triggered". My x and y endstops works fine for "Open" and "triggered" but z endstops don't changes the status. It stays as it is. Kindly suggest me way forward to solve this issue.
2) although my x and y endstops are open, still when I try to move x and y axis, they are not moving at all. My X and Y motor are feeling resistance to move. ( Simple words- My x and y motors are feeling that endstops are triggered even if my endstops are open)
Please help me in these two issues
Waiting for your response. Thank you.