Hello to all again,
My latest issue got solved and I got Marlin (2.1.2) compiled and flashed on my board (MKS robin nano v3.1) ,
Unfortunately I only then found out that due to issues between marlin 2.1.2, Marlin_UI, MKS PWC and MKS wifi. MKS advices me strongly to use Marlin 2.0.9.2 imstead.
So I caved ans started anew with Marlin 2.0.9.2 using my 2.1.2 setup as starting point.
So far so good but now I (ofcourse) get different sanitycheck errors.
Enable USE_XMAX_PLUG when homing X to MAX. and
Enable USE_ZMAX_PLUG when homing Z to MAX.
but strangely not Y (not now)
another strange thing is that I get these while I have sensorless_homing enabled, so I really shouldn't need to enable any axis(max or min) plugs as they will be physically empty.
That except the ZMIN_PLUG as I will be using BLTOUCH probe on that port. soenabeling wouldn't do much good
Additionally, when I do enable X/ZMAX_PLUG, then I do get the error for YMAX_PLUG
so really I do not understand why this is happening. and hence not how to solve this.
IT really baffles me,I looked over the files 3 times and nothing comes to mind,
Google wasn't very helpfull either.(lcekly because I don't understand the error).
I can post losts of parts of config.h andconfig.adv.h here, but I believe it would be more usefull to add both config files to this post in total.
but I also don't want to be presumptous.
Kindest of greats
Matthieu
My latest issue got solved and I got Marlin (2.1.2) compiled and flashed on my board (MKS robin nano v3.1) ,
Unfortunately I only then found out that due to issues between marlin 2.1.2, Marlin_UI, MKS PWC and MKS wifi. MKS advices me strongly to use Marlin 2.0.9.2 imstead.
So I caved ans started anew with Marlin 2.0.9.2 using my 2.1.2 setup as starting point.
So far so good but now I (ofcourse) get different sanitycheck errors.
Enable USE_XMAX_PLUG when homing X to MAX. and
Enable USE_ZMAX_PLUG when homing Z to MAX.
but strangely not Y (not now)
another strange thing is that I get these while I have sensorless_homing enabled, so I really shouldn't need to enable any axis(max or min) plugs as they will be physically empty.
That except the ZMIN_PLUG as I will be using BLTOUCH probe on that port. soenabeling wouldn't do much good
Additionally, when I do enable X/ZMAX_PLUG, then I do get the error for YMAX_PLUG
so really I do not understand why this is happening. and hence not how to solve this.
IT really baffles me,I looked over the files 3 times and nothing comes to mind,
Google wasn't very helpfull either.(lcekly because I don't understand the error).
I can post losts of parts of config.h andconfig.adv.h here, but I believe it would be more usefull to add both config files to this post in total.
but I also don't want to be presumptous.
Kindest of greats
Matthieu